Linux version 2.5.59 (root@phat-ssl) (gcc version 2.96 20000731 (Red Hat Linux 7.3 2.96-113)) #5 SMP Fri Jan 31 17:10:55 GMT 2003 Video mode to be used for restore is 317 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data) BIOS-e820: 000000001fffec00 - 000000001ffff000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 511MB LOWMEM available. found SMP MP-table at 000fe710 hm, page 000fe000 reserved twice. hm, page 000ff000 reserved twice. hm, page 000f0000 reserved twice. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: DELL Product ID: POWEREDGE D9 APIC at: 0xFEE00000 Processor #0 6:11 APIC version 17 I/O APIC #1 Version 17 at 0xFEC00000. I/O APIC #2 Version 17 at 0xFEC01000. Enabling APIC mode: Flat. Using 2 I/O APICs Processors: 1 Building zonelist for node : 0 Kernel command line: rw root=/dev/sda2 vga=791 Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1258.268 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2482.17 BogoMIPS Memory: 515444k/524224k available (1792k kernel code, 8016k reserved, 546k data, 148k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel(R) Pentium(R) III CPU family 1266MHz stepping 01 per-CPU timeslice cutoff: 1462.24 usecs. task migration cache decay timeout: 2 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Error: only one processor found. ENABLING IO-APIC IRQs Setting 1 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 1 ... ok. Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 1-0, 1-2, 1-5, 1-11, 1-13 not connected. ..TIMER: vector=0x31 pin1=-1 pin2=0 ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. number of MP IRQ sources: 57. number of IO-APIC #1 registers: 16. number of IO-APIC #2 registers: 16. testing the IO APIC....................... IO APIC #1...... .... register #00: 01000000 ....... : physical APIC id: 01 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 001 01 0 0 0 0 0 1 1 31 01 001 01 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 001 01 0 0 0 0 0 1 1 51 07 001 01 0 0 0 0 0 1 1 59 08 001 01 0 0 0 0 0 1 1 61 09 001 01 0 0 0 0 0 1 1 69 0a 001 01 1 1 0 1 0 1 1 71 0b 000 00 1 0 0 0 0 0 0 00 0c 001 01 0 0 0 0 0 1 1 79 0d 000 00 1 0 0 0 0 0 0 00 0e 001 01 0 0 0 0 0 1 1 81 0f 001 01 0 0 0 0 0 1 1 89 IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 0D000000 ....... : arbitration: 0D .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 001 01 1 1 0 1 0 1 1 91 01 001 01 1 1 0 1 0 1 1 99 02 001 01 1 1 0 1 0 1 1 A1 03 001 01 1 1 0 1 0 1 1 A9 04 001 01 1 1 0 1 0 1 1 B1 05 001 01 1 1 0 1 0 1 1 B9 06 001 01 1 1 0 1 0 1 1 C1 07 001 01 1 1 0 1 0 1 1 C9 08 001 01 1 1 0 1 0 1 1 D1 09 001 01 1 1 0 1 0 1 1 D9 0a 001 01 1 1 0 1 0 1 1 E1 0b 001 01 1 1 0 1 0 1 1 E9 0c 001 01 1 1 0 1 0 1 1 32 0d 001 01 1 1 0 1 0 1 1 3A 0e 001 01 1 1 0 1 0 1 1 42 0f 001 01 1 1 0 1 0 1 1 4A IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ12 -> 0:12 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 1:0 IRQ17 -> 1:1 IRQ18 -> 1:2 IRQ19 -> 1:3 IRQ20 -> 1:4 IRQ21 -> 1:5 IRQ22 -> 1:6 IRQ23 -> 1:7 IRQ24 -> 1:8 IRQ25 -> 1:9 IRQ26 -> 1:10 IRQ27 -> 1:11 IRQ28 -> 1:12 IRQ29 -> 1:13 IRQ30 -> 1:14 IRQ31 -> 1:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1258.0034 MHz. ..... host bus clock speed is 132.0424 MHz. Starting migration thread for cpu 0 CPUS done 8 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mtrr: v2.0 (20020519) PCI: PCI BIOS revision 2.10 entry at 0xfc72e, last bus=9 PCI: Using configuration type 1 BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) Linux Plug and Play Support v0.94 (c) Adam Belay pnp: Enabling Plug and Play Card Services. PnPBIOS: Found PnP BIOS installation structure at 0xc00fe2d0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe2f4, dseg 0x40 PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found block request queues: 128 requests per read queue 128 requests per write queue 8 requests per batch enter congestion at 15 exit congestion at 17 SCSI subsystem driver Revision: 1.00 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Discovered peer bus 02 PCI: Discovered peer bus 07 PCI: Using IRQ router ServerWorks [1166/0200] at 00:0f.0 PCI->APIC IRQ transform: (B0,I4,P0) -> 16 PCI->APIC IRQ transform: (B1,I4,P0) -> 29 PCI->APIC IRQ transform: (B1,I5,P0) -> 31 PCI->APIC IRQ transform: (B2,I2,P0) -> 26 PCI->APIC IRQ transform: (B3,I4,P0) -> 26 PCI->APIC IRQ transform: (B3,I4,P1) -> 28 PCI->APIC IRQ transform: (B4,I4,P0) -> 21 PCI->APIC IRQ transform: (B4,I5,P0) -> 22 PCI->APIC IRQ transform: (B5,I4,P0) -> 25 PCI->APIC IRQ transform: (B5,I5,P0) -> 27 PCI->APIC IRQ transform: (B6,I4,P0) -> 24 PCI->APIC IRQ transform: (B6,I5,P0) -> 23 PCI->APIC IRQ transform: (B8,I4,P0) -> 20 PCI->APIC IRQ transform: (B8,I5,P0) -> 19 PCI->APIC IRQ transform: (B9,I4,P0) -> 17 PCI->APIC IRQ transform: (B9,I5,P0) -> 18 Enabling SEP on CPU 0 aio_setup: sizeof(struct page) = 40 Initializing Cryptographic API Serial: 8250/16550 driver $Revision: 1.1 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Intel(R) PRO/100 Network Driver - version 2.1.29-k1 Copyright (c) 2002 Intel Corporation e100: selftest OK. Freeing alive device dfd7d000, eth%d e100: eth0: Intel(R) 8255x Based Network Connection Hardware receive checksums enabled cpu cycle saver enabled e100: selftest OK. Freeing alive device dfd53800, eth%d e100: eth1: Intel(R) PRO/100+ Dual Port Server Adapter e100: selftest OK. Freeing alive device dfd53000, eth%d e100: eth2: Intel(R) PRO/100+ Dual Port Server Adapter e100: selftest OK. Freeing alive device dfd4d800, eth%d e100: eth3: Intel(R) PRO/100+ Dual Port Server Adapter e100: selftest OK. Freeing alive device dfd4d000, eth%d e100: eth4: Intel(R) PRO/100+ Dual Port Server Adapter e100: selftest OK. Freeing alive device dfd47800, eth%d e100: eth5: Intel(R) PRO/100+ Dual Port Server Adapter e100: selftest OK. Freeing alive device dfd47000, eth%d e100: eth6: Intel(R) PRO/100+ Dual Port Server Adapter e100: selftest OK. Freeing alive device dfd41800, eth%d e100: eth7: Intel(R) PRO/100+ Dual Port Server Adapter e100: selftest OK. Freeing alive device dfd41000, eth%d e100: eth8: Intel(R) PRO/100+ Dual Port Server Adapter e100: selftest OK. Freeing alive device dfd3a800, eth%d e100: eth9: Intel(R) PRO/100+ Dual Port Server Adapter e100: selftest OK. Freeing alive device dfd3a000, eth%d e100: eth10: Intel(R) PRO/100+ Dual Port Server Adapter e100: selftest OK. Freeing alive device dfd33800, eth%d e100: eth11: Intel(R) PRO/100+ Dual Port Server Adapter e100: selftest OK. Freeing alive device dfd33000, eth%d e100: eth12: Intel(R) PRO/100+ Dual Port Server Adapter Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: TEAC CD-ROM CD-224E, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.26 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs Red Hat/Adaptec aacraid driver, Jan 31 2003 AAC0: kernel 2.5.4 build 2991 AAC0: monitor 2.5.4 build 2991 AAC0: bios 2.5.0 build 2991 AAC0: serial 016a410d2 scsi1 : percraid Vendor: DELL Model: PERCRAID RAID5 Rev: V1.0 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 71089152 512-byte hdwr sectors (36398 MB) sda: Write Protect is off sda: Mode Sense: 00 06 00 00 sda: cache data unavailable sda: assuming drive cache: write through sda: sda1 sda2 sda3 Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0 mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 16384 bind 21845) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 Bridge firewalling registered found reiserfs format "3.6" with standard journal Reiserfs journal params: device sd(8,2), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (sd(8,2)) for (sd(8,2)) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem). Freeing unused kernel memory: 148k freed Adding 1052248k swap on /dev/sda3. Priority:-1 extents:1 found reiserfs format "3.6" with standard journal Reiserfs journal params: device sd(8,1), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (sd(8,1)) for (sd(8,1)) Using r5 hash to sort names e100: eth0 NIC Link is Up 100 Mbps Full duplex warning: process `update' used the obsolete bdflush system call Fix your initscripts? warning: process `update' used the obsolete bdflush system call Fix your initscripts? aacraid:Battery charge is now OK oprofile: using NMI interrupt.