00:00.0 Host bridge: ServerWorks CNB20HE Host Bridge (rev 23)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:00.1 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 32, cache line size 08

00:00.2 Host bridge: ServerWorks: Unknown device 0006 (rev 01)
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-

00:00.3 Host bridge: ServerWorks: Unknown device 0006 (rev 01)
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-

00:04.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08)
	Subsystem: Dell Computer Corporation: Unknown device 009b
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min, 14000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fe502000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at dcc0 [size=64]
	Region 2: Memory at fe000000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at fe100000 [disabled] [size=1M]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-

00:08.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, cache line size 08
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fe200000-fe4fffff
	Prefetchable memory behind bridge: 00000000feb00000-00000000feb00000
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
		Bridge: PM- B3+

00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA])
	Subsystem: Dell Computer Corporation: Unknown device 00d9
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min), cache line size 08
	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: I/O ports at d800 [size=256]
	Region 2: Memory at fe501000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [5c] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 50)
	Subsystem: ServerWorks OSB4 South Bridge
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller (prog-if 8a [Master SecP PriP])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Region 4: I/O ports at 08b0 [size=16]

00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 04) (prog-if 10 [OHCI])
	Subsystem: ServerWorks OSB4/CSB5 OHCI USB Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (20000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at fe500000 (32-bit, non-prefetchable) [size=4K]

01:04.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 05)
	Subsystem: Intel Corporation EtherExpress PRO/100+ Dual Port Adapter
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min, 14000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 29
	Region 0: Memory at febff000 (32-bit, prefetchable) [size=4K]
	Region 1: I/O ports at ece0 [size=32]
	Region 2: Memory at fe300000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at fe400000 [disabled] [size=1M]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:05.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 05)
	Subsystem: Intel Corporation EtherExpress PRO/100+ Dual Port Adapter
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min, 14000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 31
	Region 0: Memory at febfe000 (32-bit, prefetchable) [size=4K]
	Region 1: I/O ports at ecc0 [size=32]
	Region 2: Memory at fe200000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at fe400000 [disabled] [size=1M]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:02.0 PCI bridge: Intel Corporation: Unknown device 0962 (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, cache line size 10
	Bus: primary=02, secondary=03, subordinate=03, sec-latency=32
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: fce00000-fcffffff
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

02:02.1 RAID bus controller: Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di (rev 01)
	Subsystem: Dell Computer Corporation: Unknown device 00d9
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, cache line size 08
	Interrupt: pin A routed to IRQ 26
	Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
	Expansion ROM at fc400000 [disabled] [size=64K]

02:0a.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, cache line size 08
	Bus: primary=02, secondary=04, subordinate=04, sec-latency=32
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: fcb00000-fcdfffff
	Prefetchable memory behind bridge: 00000000f8200000-00000000f8200000
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
		Bridge: PM- B3+

02:0c.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, cache line size 08
	Bus: primary=02, secondary=05, subordinate=05, sec-latency=32
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: fc800000-fcafffff
	Prefetchable memory behind bridge: 00000000f8100000-00000000f8100000
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
		Bridge: PM- B3+

02:0e.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, cache line size 08
	Bus: primary=02, secondary=06, subordinate=06, sec-latency=32
	I/O behind bridge: 00009000-00009fff
	Memory behind bridge: fc500000-fc7fffff
	Prefetchable memory behind bridge: 00000000f8000000-00000000f8000000
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
		Bridge: PM- B3+

03:04.0 SCSI storage controller: Adaptec RAID subsystem HBA (rev 01)
	Subsystem: Dell Computer Corporation: Unknown device 00c5
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (10000ns min, 6250ns max), cache line size 08
	Interrupt: pin A routed to IRQ 26
	BIST result: 00
	Region 0: I/O ports at cc00 [size=256]
	Region 1: Memory at fceff000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at fcf00000 [disabled] [size=128K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

03:04.1 SCSI storage controller: Adaptec 7899P (rev 01)
	Subsystem: Dell Computer Corporation: Unknown device 00d9
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (10000ns min, 6250ns max), cache line size 08
	Interrupt: pin B routed to IRQ 28
	BIST result: 00
	Region 0: I/O ports at c800 [disabled] [size=256]
	Region 1: Memory at fcefe000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at fcf00000 [disabled] [size=128K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

04:04.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 05)
	Subsystem: Intel Corporation EtherExpress PRO/100+ Dual Port Adapter
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min, 14000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at f82ff000 (32-bit, prefetchable) [size=4K]
	Region 1: I/O ports at bce0 [size=32]
	Region 2: Memory at fcc00000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at fcd00000 [disabled] [size=1M]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

04:05.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 05)
	Subsystem: Intel Corporation EtherExpress PRO/100+ Dual Port Adapter
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min, 14000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at f82fe000 (32-bit, prefetchable) [size=4K]
	Region 1: I/O ports at bcc0 [size=32]
	Region 2: Memory at fcb00000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at fcd00000 [disabled] [size=1M]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

05:04.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 05)
	Subsystem: Intel Corporation EtherExpress PRO/100+ Dual Port Adapter
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min, 14000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 25
	Region 0: Memory at f81ff000 (32-bit, prefetchable) [size=4K]
	Region 1: I/O ports at ace0 [size=32]
	Region 2: Memory at fc900000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at fca00000 [disabled] [size=1M]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

05:05.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 05)
	Subsystem: Intel Corporation EtherExpress PRO/100+ Dual Port Adapter
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min, 14000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 27
	Region 0: Memory at f81fe000 (32-bit, prefetchable) [size=4K]
	Region 1: I/O ports at acc0 [size=32]
	Region 2: Memory at fc800000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at fca00000 [disabled] [size=1M]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

06:04.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 05)
	Subsystem: Intel Corporation EtherExpress PRO/100+ Dual Port Adapter
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min, 14000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 24
	Region 0: Memory at f80ff000 (32-bit, prefetchable) [size=4K]
	Region 1: I/O ports at 9ce0 [size=32]
	Region 2: Memory at fc600000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at fc700000 [disabled] [size=1M]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

06:05.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 05)
	Subsystem: Intel Corporation EtherExpress PRO/100+ Dual Port Adapter
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min, 14000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f80fe000 (32-bit, prefetchable) [size=4K]
	Region 1: I/O ports at 9cc0 [size=32]
	Region 2: Memory at fc500000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at fc700000 [disabled] [size=1M]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

07:06.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, cache line size 08
	Bus: primary=07, secondary=08, subordinate=08, sec-latency=32
	I/O behind bridge: 00008000-00008fff
	Memory behind bridge: fc100000-fc3fffff
	Prefetchable memory behind bridge: 00000000fea00000-00000000fea00000
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
		Bridge: PM- B3+

07:08.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, cache line size 08
	Bus: primary=07, secondary=09, subordinate=09, sec-latency=32
	I/O behind bridge: 00007000-00007fff
	Memory behind bridge: fbe00000-fc0fffff
	Prefetchable memory behind bridge: 00000000fe900000-00000000fe900000
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
		Bridge: PM- B3+

08:04.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 05)
	Subsystem: Intel Corporation EtherExpress PRO/100+ Dual Port Adapter
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min, 14000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at feaff000 (32-bit, prefetchable) [size=4K]
	Region 1: I/O ports at 8ce0 [size=32]
	Region 2: Memory at fc200000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at fc300000 [disabled] [size=1M]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

08:05.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 05)
	Subsystem: Intel Corporation EtherExpress PRO/100+ Dual Port Adapter
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min, 14000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at feafe000 (32-bit, prefetchable) [size=4K]
	Region 1: I/O ports at 8cc0 [size=32]
	Region 2: Memory at fc100000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at fc300000 [disabled] [size=1M]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

09:04.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 05)
	Subsystem: Intel Corporation EtherExpress PRO/100+ Dual Port Adapter
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min, 14000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fe9ff000 (32-bit, prefetchable) [size=4K]
	Region 1: I/O ports at 7ce0 [size=32]
	Region 2: Memory at fbf00000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at fc000000 [disabled] [size=1M]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

09:05.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 05)
	Subsystem: Intel Corporation EtherExpress PRO/100+ Dual Port Adapter
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min, 14000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fe9fe000 (32-bit, prefetchable) [size=4K]
	Region 1: I/O ports at 7cc0 [size=32]
	Region 2: Memory at fbe00000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at fc000000 [disabled] [size=1M]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-